1. When purchasing, we only think about the low price. When using it, we find that the quality is too poor, the operation is unstable, and the downtime of the faults is long, thus causing the loss of the downtime of the consumption line. If the price is low, we will have some shortcomings in other areas.
2. When purchasing, we only consider the stability of operation, ignore the ratio of energy consumption, and accumulate huge waste over time. The cost of equipment purchase accounts for about 5-10%, the cost of maintenance accounts for about 5-10%, and the cost of electricity consumption accounts for about 80-90%. Therefore, when choosing and purchasing, we should first consider the efficiency of the machine, and frugality means making money.
3. Operational stability and convenience are also the key factors to be considered. Supplier's after-sales service quality, defect overhaul and inconvenience in purchasing spare parts all result in unnecessary loss. Attention should be paid to the quality of after-sales service provided by suppliers.
Jinan air compressor
A. The size and number of compressors should be calculated carefully.
B. Post-disposal equipment is not as much as possible, but as required.
C. The machine room should be as clean and well ventilated as possible.
D. Pipeline layout should minimize elbows, and the selection of joints and pipe diameters should also be reasonable.
F. Consider the place and condition of using gas. If the use of air space is narrow (marine, automotive), it should be vertical; if there is a long interval change in the use of air space (over 500 meters), it should consider moving type; if the use site can not supply electricity, it should choose diesel engine driving type; if there is no running water in the use site, it must choose air-cooled type. In air-cooled and water-cooled cooling modes, users often have a wrong idea that water-cooled is good, but in fact it is not. Air-cooled compressors account for more than 90% of small compressors at home and abroad. This is due to the tedious design of air-cooled compressors and the lack of water source when they are used. The water-cooled compressor is suitable for larger places, and the cooling effect of the compressor is guaranteed.
Jinan air compressor
G. Consider the quality of compressed air. Compressed air produced by ordinary compressors contains a certain amount of smooth oil, and a certain amount of water. Some places are prohibited from oil and water. At this time, we should not only pay attention to the selection of compressors, but also increase subordinate installation when necessary. Processing methods: First, the use of non-smooth compressor. The second and commonly used method is to install or dry the compressor (either) with one or two levels of purification. This installation can make the compressor air neither oil nor water, so that the oil and water content in compressed air is less than 3 ppm, which can meet the process requirements.
In a word, it is advocated that when planning the purchase and use of air compressor equipment, comprehensive consideration should be given to equipment efficiency, operation stability, accommodation convenience and after-sales service quality, and professional equipment suppliers should be selected for overall planning. Above is the related content that Jinan air compressor manufacturer arranges for everybody, hope to help everybody, our website is .