亚虎娱乐手机版您身边的济南空压机厂家!
18765879198

首页>企业新闻
空气压缩机除杂的原因及解决方法
Time:2019-06-28 11:15:25       来源:/      

  当我们使用它,我们需要处理压缩空气与杂质之前,它可以用于生产。空气压缩机产生的压缩空气一般含有固体杂质和水,所以空气压缩机是一套完整的系统。压缩空气处理是通过过滤器过滤颗粒杂质和油、液杂质的过程,是对压缩空气的初步处理。普通滤芯的底部是不能通过的,杂质一般被收集到滤芯中。通过滤芯到滤芯底部,再通过自动排水除去杂质。然而,在这个过程中会有一些问题。固体杂质不能完全从滤芯上清除,会粘附在滤芯内壁上。这就增加了压缩空气的工作阻力,使水和油的含量也会随着压缩空气排出。

  When we use it, we need to deal with compressed air and impurities before it can be used in production. Compressed air produced by air compressor generally contains solid impurities and water, so air compressor is a complete system. Compressed air treatment is a preliminary treatment of compressed air by filtering particulate impurities, oil and liquid impurities through filters. The bottom of the ordinary filter element can not pass through, and impurities are generally collected into the filter element. Through the filter element to the bottom of the filter element, and then through automatic drainage to remove impurities. However, there will be some problems in this process. Solid impurities can not be completely removed from the filter element and will adhere to the inner wall of the filter element. This increases the working resistance of compressed air, so that the content of water and oil will be discharged with compressed air.
济南空压机
  济南空压机
  Jinan air compressor
  我们需要配备后处理设备,因为它不能完全清洗。压缩空气压缩机主要对压缩空气压缩机进行冷却处理,使压缩水的空气压缩机在较低温度下,部分水会凝结成液体,然后通过自动排水装置排出。但冻结方式也有一定的局限性。制冷剂的温度不能低于2℃,否则会发生结冰现象,导致管路堵塞。如果你想要一个非常低的露点,你只能增加压缩机的功率。这将增加成本。
  We need post-processing equipment because it can't be cleaned completely. Compressed air compressor mainly cooling compressed air compressor, so that compressed water compressor at a lower temperature, part of the water will condense into liquid, and then through the automatic drainage device discharge. But the freezing method also has some limitations. Refrigerant temperature should not be lower than 2 C, otherwise ice will occur, resulting in pipeline blockage. If you want a very low dew point, you can only increase the power of the compressor. This will increase costs.
  我们需要吸附干燥处理,主要通过吸附剂吸附、高压吸水、低压再生等方式得到我们想要的干燥空气。当然,没有十全十美的吸附剂,也会有一点缺点,吸附剂填充不能完全准确,容易导致能耗大,在这种情况下,更换吸附剂就会更加困难。
  We need adsorption drying treatment, mainly through adsorbent adsorption, high-pressure water absorption, low-pressure regeneration and other ways to get the dry air we want. Of course, without perfect adsorbents, there will also be some shortcomings. The filling of adsorbents can not be completely accurate, which can easily lead to high energy consumption. In this case, it will be more difficult to replace adsorbents.
  以上是济南空压机厂家为大家整理的相关内容,想要了解更多,欢迎点击我们网站
  The above is the related content that Jinan Air Compressor Factory sorted out for you. For more information, please click on our website .

电话:0531-85963300     手机:18765879198   地址:济南市天桥区无影山中路130号重汽彩世界     备案号:鲁公网安备 37010502001004号 >

版权所有:亚虎娱乐手机版 济南科邦机械主营::济南空压机及配件 网址:    技术支持:诺商信息

鲁公网安备 37010502001004号